• Spectra B-503/504, Palava

Fuel Oil Piping Contractors

Fuel Oil Piping Contractors

  • ❖ Fuel Oil Piping Are Designed to provide Reliable Fuels to Boilers, Generators, Furnaces, Ovens, Yarn Dyeing Machines and Other Firing Units to Develop Firing in Combustion Chambers.
  • ❖ Fuel Oil Piping Layout includes Piping systems for Supply for Fuels such as Diesel Piping, LDO Piping, Furnace Oil Piping (F.O. Piping), Gas Piping.
  • ❖ For Furnace Oil Piping Heat Tracing Systems is provided in Pipeline so as to Maintain the Viscosity of it otherwise it will Tends to get solidify at normal Temperature and Conditions Disturbing the Firing of Boilers, Generators, Furnaces, Ovens, Yarn Dyeing Machines and Other Firing Units.
  • ❖ Heat Tracing Systems Are Provided by jacketed Piping with the use of Heating Fluid Flowing in Jacket of Furnace Oil Piping and Electrical Heaters (Tracer Heaters) wound around the Pipelines, Selection of this Heat Tracing Systems is done based on Economy Factor for Client whichever is Cost Saving.
  • ❖ Fuel Oil Piping Systems Layout Are Designed in such way that Proper Flow is Maintained for Boilers, Generators, Furnaces, Ovens Yarn Dyeing Machines and Other Firing Units.
  • ❖ Design of Ring Man Piping Systems for Fuel Oil for Ovens, Furnaces.
  • ❖ Fabrication of Frames for Fuel Pumps.
  • ❖ Calculations of Pipe Sizing for Fuel Oils Are Done with Providing Proper Flow Rate.
  • ❖ Selection of Piping Material and its Grades for Pipe, Fittings, Valves as per ASME/ Standards.
  • ❖ Piping Material such as Pipe, Fittings, Valves used for Fabrication of Compressed air Piping are of Standard Companies.
  • ❖ Design and Fabrication of Supports for Fuel Oil Piping Systems to Support Dead Weight of Pipe, Fittings, Valves, Fuels to avoid Sagging of Pipe During Sustain and Operating Conditions with Distance Between the Supports Are Selected as per Piping Engineering Standards.
  • ❖ Piping Material Take off (MTO)/Bill of Material (BOM).
  • ❖ Fabrication of Fuel Oil Piping is Carried out as per General Engineering Standards and Practices.
  • ❖ Pipeline Erection for Compressed Air.
  • ❖ Pneumatic Testing of Fuel Air Piping for Leak Test Compressed Air Pipeline, Checking of
  • Welding Leakages in Piping Weld Joints, Checking of Leakages in Flange Joints and Checking of Leakages in Threaded Connection.
  • ❖ Commissioning of Fuel Oil Piping.